These LED road studs are naturally charged by the sun.As soon as it starts getting dark the LED lights in the road stud come on automatically each night for up to 10 hours. They have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.
This led road stud lights can illuminate the expressway without a power grid. Each led road stud light contains its own solar collector and LED lights, and a microprocessor that manages the power supply, so that a few hours of sunlight can give them enough energy to illuminate for a few days.
The Specification of led road stud light:
| Body material | Aluminum(GB-ADC12)+PC(Japan Brand) |
| Power supply | USA Brand High Efficient Solar Panel |
| Battery | NI-MH1.2V/600MAH(high temperature resistance, Made in China) Lithium battery3.2V/500MAH(Made in Japan) |
| Water proof | IP68 |
| Visual distance | >800m |
| Life span | 2years for NI-MH battery; 5years for Lithium battery; 10years for super capacitor |
| Load capacity | >30T(can be installed in the middle of road) |
| Size | L125mm*W107mm*H26+50mm |
Featurers of led road stud light:
– High brightness America brand led light with 100000 hours of working time.
– USA brand solar panel. 22% high conversion rate. Fast charge rate.
– Japan brand casting Al material. LED road stud bears more pressure.
– Most quality Epoxy resin glue to fix the solar stud, making sure of solar power charge.
– Philips PC board, safe and stable. Long time warranty for road stud reflectors.
– The leader of led road stud. Load capacity:>30T(can be installed in the middle of road)
The advantage of these waterproof IP68 LED road studs is that they can also play an effective role in heavy rain, mist or fog. This LED road stud light for sale in NOKIN can be used in expressway, highway,freeways, urban road and other heavy traffic road.
Long time warranty for road stud reflectors. - High temperature resistance battery. Working from -40°C to +80°C. Super capacitor solar stud is available. - Top quality manufacture, weld directly to the PCB, no damage to led chip. - Solar led marker lights are tested in water proof, charge rate and hardness before selling.
Aluminium Solar Road Studs. Dual Sided LED's. Quick Charging, long working. IP67 rating fully water proof. 132X122X81 mm.
Uni-directional or Bi-directional LED's (single or dual) Power Autonomy in the dark (NI-MH) after full charge Working temperature Physical dimensions Stud body Mechanical Resistance Electrical Characteristics Battery (NI-MH) 200 hours -250C to +850C Mechanical Characteristics Diameter 144mm Rising from road surface: 15 mm (to centre of parable)
1) approves the road stud specified below for the purposes of carrying out road tests accordance with the provisions of British Standard BS EN 1463-1:2000 (as required by draft Standard BS EN 1463-3 pt2) on the A3 Trunk Road at
VEVOR Solar Led Pathway Marker Road Stud Light 12 Pcs Dock Driveway Path Warning Lights with 6 White Leds Solar Dock Lights for Deck Driveway Garden Walkway Sidewalk Steps: Amazon.com.au: Lighting
With the ever increasing popularity of LED lighting, most people understand that LED lights save tons of energy, and they have probably seen how LED's enhance the look and functionality inside the home or office. However, LED lights are probably not the first thing that comes to mind with talking about improving curb appeal.
response while others indicating the bi-directional response and remaining group find no response at all among the three variables in questions. To see how those linkage between the variables in question is mixed observe the following studies. The studies by M. Dritsaki, C. Dritsaki and A. Adamopoulos (2004) on the analysis of how FDI, export and
Select the studs operation mode between Flashing, Always On or Sequential, and the light direction of Uni or Bi directional. Flash Rate Adjust the flash rate after installation. Night Level Detection Adjustment of the level of light detection required for activation of the LEDs. Independent LED Control
SolarVision develops and manufactures road construction Solar Road Studs, for the marking of pedestrian crossings, roundabouts, traffic islands etc. Our products are made of active shining LED light source and are fully autonomous over several years.
Add a touch of color and some ambient lighting to your garden or pathway with these solar-powered hydrangea-like LED stake lights. 1-, 2-, or 3-pack of stake lights LED lights powered by a solar panel Hydrangea flower-like design to fit into gardens and more Sturdy stainless steel construction for outdoor use Turns on and off automatically at
Led Number: 1 or 2 Led (Uni-directional), 2 or 4 Led (Bi-directional) – 5mm. Led Color: Amber, Red, White, Blue, Green. Led Configuration: Uni and bi-directional with the possibility of using different Led colors in the same unit. Mechanical. Projection: 12,7mm above ground. Minimum Installation Depth: 50 mm.
Road reflectors, also called raised pavement markers, are designed to help guide traffic and encourage road safety by helping guide motorists.
SR-i40 road stud is ideal for countries with low sun exposure due to its high performance photovoltaic solar module. It has robust construction, making it suitable for harsh conditions and ready for snow plough machines. This road stud has low power RF with 868MHz network communication. The i-stud evolution technology applied to SR-i40
The NOKIN solar stud studs are now in use in approximately 120 locations across the UK, in the Netherlands, France, Australia and in South Africa. Road safety authorities have in several cases reported reductions in night time accidents of well over 70% since the installation of the “smart” road studs.
SPI1 road stud is ideal for countries with low sun exposure due to its high performance photovoltaic solar module. It has robust construction, making it suitable for harsh conditions and now plow resistant. This road stud has low power RF with 868MHz network communication.
